The main working structure and main items of the labeling machine-automatic labeling machine manufacturer-online printing labeling machine-shenzhen bogao logo

The main working structure of the Bogao logo labeling machine consists of these parts, which are the label supply device-the label removal device-the printing device-the gluing device and the interlocking device. Only when the components of the labeling machine work well together can the labels be applied perfectly. The working principle of the Bogao logo labeling machine is as follows. At the beginning, the box feeds the labeling machine on the conveyor at a constant speed. The fixing device on the labeling machine separates the boxes by a fixed distance and pushes the boxes in the direction of the conveyor belt. The mechanical system of the labeling machine includes a driving wheel, a rotary automatic labeling machine, a labeling wheel and a reel. The drive wheel drags the label tape intermittently to move it, pulls the label tape out of the reel, and the label wheel is pressed against the box by the label wheel. Open loop displacement control is used on the reel to maintain the tension of the label strip. Since the labels are tightly connected to each other on the labeling strip, the labeling strip must be stopped continuously. Let's take a look at the specific usage of the Bogao logo labeling machine: The first point is how to install the label paper of the labeling machine correctly 1 When adding labels, please make sure to press the label correctly. If the pressure is too large, the label will cause misalignment, and the acceleration of the label will cause a certain amount of wear. 2. Add labels to ensure that the labels are aligned. The first label should be kept between 0.1 and 0.2mm between the guide forks, and the clip should be evenly pressed on the side strips. After the fingers are opened, the roller sponge needs to press the label on the bottle. Finally, to ensure that the label is not skewed, the vertical and horizontal positioning plates need to be adjusted. The second point is the marking test when the Bogao logo labeling machine is working. For the automatic round bottle labeling machine, when the bottle reaches the labeling position through the conveyor belt, it must be ensured that the label brush is pressed vertically and evenly. In the process, if the pressure is insufficient or the pressure is too high, it is marked as a label. The position is skewed, so operator attention is required. When the automatic labeling machine is found to be tilted, the brush pressure should be adjusted. The third hot melt adhesive labeling machine needs to pay attention to the following points: 1 When the thickness of the target rubber layer is too thick, it should be cleaned in time or the label will shift. 2 The temperature of the glue should be moderate. If the temperature is too low, the viscosity will drop and the label will be inaccurate. If the temperature is too high, the glue overflow when sticking the label will affect the appearance of the product. Therefore, the glue can be adjusted according to the temperature required by the standard paper. 3 It is very important to choose the right standard paper together with the product. 4 The labeling machine should be cleaned regularly, such as runner-standard box-squeegee-rubber roller, etc. Familiarity is the prerequisite for driving, and the details determine the use time. A little more care will definitely bring more value. The above are the precautions for the use of several labeling machines reminded by the Bogao logo.