The HP Photosmart C4385 is a thermal inkjet printer
by：Zhongya Packaging 2020-08-09
Plug in 1 finish in the energy cord in to the port around the AC adapter. Connect the adapter towards the matching port positioned around the rear on the printer, close to the upper-right corner. Plug the remaining finish from the energy cord into a nearby electrical outlet.
Obtain the handle panel, positioned around the left side from the printer's major panel. Press the energy button, situated within the top-left corner on the manage panel. Press the arrow buttons to pick the suitable language solution in the LCD show. Press the 'OK' button to confirm your choice.
Grip the major edge in the print carriage door, installed within the printer's front panel. Pull the best edge down till the door opens. Wait for the print carriage to move into view.
Take away the plastic tape affixed for the underside from the tri-color ink cartridge. Angle the rear with the cartridge upward and insert it in to the left slot around the print carriage. Push the front on the cartridge up till the element locks into spot. Set up the black ink cartridge inside the remaining slot within a equivalent manner.
Close the print carriage door and press the 'OK' button. Discover the paper tray, attached for the bottom edge of your printer's front panel. Pull out the extender installed around the finish of your tray. Slide the paper width guide, positioned in the opposite finish from the tray, each of the solution to the left. Fill the tray with plain paper; don't fill the tray beyond the major with the paper width guide. Slide the guide to as much as the edge with the stack of paper.
Press the 'OK' button and wait for the printer to create an alignment web page. Lift the scanner cover, positioned around the printer's best panel. Location the alignment web page onto the scanner glass, using the printed side facing down. Align the top-right corner on the alignment web page together with the near-right corner in the scanner glass. Close the cover and press 'OK.'
7. Connect a single finish of your USB cable for the matching port around the rear on the printer, subsequent towards the energy port; Macintosh customers may perhaps connect the remaining finish in the cable for the pc at this time, but Windows customers have to wait. Insert the installation disc into your computer's CD or DVD drive. Run the installer application and stick to the displayed guidelines; Windows customers could connect the USB cable when prompted to by the installer.