The HP Photosmart C4385 can be a thermal inkjet

Guidelines

Plug in 1 finish with the energy cord in to the port around the AC adapter. Connect the adapter for the matching port situated around the rear with the printer, close to the upper-right corner. Plug the remaining finish in the energy cord into a nearby electrical outlet.

Uncover the manage panel, situated around the left side with the printer's best panel. Press the energy button, situated inside the top-left corner from the manage panel. Press the arrow buttons to choose the acceptable language selection in the LCD show. Press the 'OK' button to confirm your choice.

Grip the top rated edge from the print carriage door, installed inside the printer's front panel. Pull the prime edge down till the door opens. Wait for the print carriage to move into view.

Take away the plastic tape affixed for the underside with the tri-color ink cartridge. Angle the rear with the cartridge upward and insert it in to the left slot around the print carriage. Push the front from the cartridge up till the element locks into spot. Set up the black ink cartridge inside the remaining slot within a related manner.

Close the print carriage door and press the 'OK' button. Discover the paper tray, attached for the bottom edge on the printer's front panel. Pull out the extender installed around the finish on the tray. Slide the paper width guide, situated in the opposite finish in the tray, all of the approach to the left. Fill the tray with plain paper; don't fill the tray beyond the best from the paper width guide. Slide the guide to as much as the edge with the stack of paper.

Press the 'OK' button and wait for the printer to create an alignment web page. Lift the scanner cover, positioned around the printer's prime panel. Location the alignment web page onto the scanner glass, with all the printed side facing down. Align the top-right corner with the alignment web page with all the near-right corner on the scanner glass. Close the cover and press 'OK.'

Connect 1 finish from the USB cable for the matching port around the rear in the printer, subsequent for the energy port; Macintosh customers could connect the remaining finish from the cable for the personal computer at this time, but Windows customers should wait. Insert the installation disc into your computer's CD or DVD drive. Run the installer application and adhere to the displayed directions; Windows customers may well connect the USB cable when prompted to by the installer.