Let's take a look at how to deal with common faults of paste labeling machine-industry news

In recent years, our production work has become more and more inseparable from label posting, so the paste labeling machine was born. Our labeling work has gradually developed from manual and semi-automatic labeling to automatic machine labeling. Nowadays, high-speed pulping The paste labeling machine is welcomed by many companies, but the paste labeling machine will definitely fail during use. Then, let's take a look at how to deal with the common faults of the paste labeling machine.　　　　 1. Wrinkle label is posted 　　　　 If the paste labeling machine sometimes puts a wrinkle label, how can this be caused? It is possible that the bidding speed is too fast, but the speed of conveying products cannot keep up. At this time, we have to adjust the electronic eye on the conveyor to ensure that the product conveying speed is consistent with the labeling speed, and the fault can be solved.　　　　2, the label will be off-track 　　　　 Sometimes the label affixed by the paste labeling machine will be off-track, how can this be caused? This is mainly due to the pull rod phenomenon in the labeling process, which will cause the labeling to be uneven. It should be checked whether there is abrasion on the peeling label, and the uneven pulling force should be corrected in time to reduce label deviation.　　　　3, the label has bubbles 　　　　 This kind of problem is mainly caused by the dirty surface of the product, or the product itself is caused by static electricity. We need to eliminate static electricity in time or clean the product packaging.　　　　 The above are some ways to deal with common failures of the paste labeling machine.