How to make the automatic labeling machine label correctly and effectively

How to use the automatic labeling machine correctly? Some problems should be paid attention to during the actual use of the automatic labeling machine. During the actual use of the automatic labeling machine, if the entire labeling machine is to be turned on, then We can take a look at turning on the power of the main switch, and then turn on the power switch on the left side of the entire device. When the labeling machine is turning on, enter the relevant password on the existing touch screen to enter the system. After all the labeled papers are installed, various parameters can be adjusted through the touch screen. While the automatic labeling machine is in actual use, everyone will find that if the entire labeling machine is to be used, the ambient temperature must be relatively dry, and it must be ensured that all of them are used in places with relatively little dust. Where there is no water or where chemicals are recommended, do not use it in flammable and explosive places. Before the automatic labeling machine is actually used, it is best to make relevant preparations. Check the normal condition of the entire current and voltage, check the existing conveyor belt, and check whether there are any other miscellaneous inside the entire labeling machine. Things. Before starting the automatic labeling machine, it is best to do the relevant adjustments. The height or the entire horizontal position and related angles of the entire labeling machine should be adjusted to a suitable position, and the adjustment should be lowered. For the entire pressure roller, the entire label paper must be tightly peeled off the standard plate. Adjust the existing split screen structure, and in the process of actual adjustment, there will be a related middle tube just before use, holding a slightly wider pitch to adjust the first round on the entire stick, so that the whole thing on the buoy Close to the middle tube. In the process of actual use of the automatic labeling machine, if the entire labeling machine is to be turned on, then we can look at the power of turning on the main switch, and then turn on the power switch on the left side of the entire device. When it is turned on, you can enter the system by entering the relevant password on the existing touch screen. After all the label papers are installed, various parameters can be adjusted through the touch screen. In the actual labeling process of the automatic labeling machine, how to perform effective labeling, I believe everyone should have an understanding based on the above situation.