How to maintain the self-adhesive labeling machine-industry news

The self-adhesive labeling machine is a kind of machinery and equipment used to stick labels and stickers to the packaging in the specified area. During the process, how should the self-adhesive labeling machine be maintained? 1. Find the reason for the problem. If the sticker labeling machine appears crooked during the labeling process, or the label is easy to move, the reasons for this problem may be the following points: 　　　　 1. It is caused by the wrong position of the operator's station during the process, or too much glue is applied.　　　　2, the labelled product is not placed in the correct position, it will cause the phenomenon of crooked or moving when labeling.　　　　 3. It is not ruled out that the position of the stock transfer and the marking device are not adjusted properly. If the friction strip is damaged, the labeling effect will also be affected.　　　　 4. The blowing device should not be too dirty.　　　　 2. How to solve 　　　　 1. Adjust the standing position when labeling, choose the most suitable position, and then adjust the glue scraping device to ensure that the amount of glue is moderate.　　　　 2. Adjust the product packaging box or product packaging bag to ensure the normal position, adjust the drum and friction strip, or replace the bottle star wheel device to keep the air outlet device hygienic and ventilated.　　　　 The above is about the failure detection and maintenance of the self-adhesive labeling machine. Good maintenance can increase the service life of the label blowing machine and avoid the occurrence of failures.