How to deal with the failure of the automatic labeling machine to take labels

It is not only the performance of the automatic labeling machine that affects the production capacity of the automatic labeling machine. The failure is also an important factor, because once a failure occurs, it needs to stop working and then eliminate the failure before it can work normally. Therefore, if the failure can be solved quickly To avoid wasting time, the technicians of Bogao Logo will share with you how to deal with the failure of the automatic labeling machine to take labels. First of all, we check whether it is because the size error of our label paper is too large, so the label can not be inserted at all, or the label paper has been inserted but has not come out. At this time, we need to open the label box to check whether the label is inside. The label paper is jammed. If it is jammed by the label paper, you only need to remove the label paper to restore the label to normal. If there is no problem with the label, then it is very likely that there is a problem with the label box. We need to check whether the tightness of the label hook spring on the label box is appropriate. If it is not suitable, adjust it according to the manual. If it is inappropriate, then Will cause the label to fall off before entering the label box. When the label enters the label box and the position of the label holder is inappropriate, it will also cause the label failure. This is where we need to debug the position between the label holder and the label. Under normal circumstances, the position between them should be within 1cm. Whether the automatic labeling machine is good or not depends not only on its performance, but also on the usual maintenance and maintenance. Therefore, as long as you pay more attention to the maintenance and maintenance, you can avoid a large number of failures.