How to choose the motor of the automatic labeling machine? -Automatic labeling machine manufacturers-Online printing labeling machine-Shenzhen Bogao logo
by：Zhongya Packaging 2022-05-11
The motor of the automatic labeling machine produced by Bogao Logo is imported from abroad. The quality of the motor determines the service life of the automatic labeling machine. Therefore, the use of high-quality motors becomes more and more important. There are many types of motors in the market. How to choose a motor suitable for automatic labeling machine from many motors. Below is the Bogao logo technician telling you how to choose a high-quality motor. As we all know, different equipment operations have different requirements for the reducer or motor, so we need to choose the corresponding motor or reducer according to our actual needs. First of all, in the use of the reducer, we must understand the actual load of the equipment to determine the output torque of the reducer required by the equipment. Another thing to note is that different operating modes have different torques, so you need to be careful in installation dimensions. In some places with small spaces, it is impossible to install large motors and reducers. When only matching reducers or reducers is needed, When using one of the motors, we need to first determine the size issues between the two, such as the size of the shaft and the shaft hole, the size of the flange, the fit between the key and the keyway, etc., which all require our special attention. The power, type, and type of the motor are extremely important to choose the right motor. When selecting a motor, it should be selected according to the actual conditions of the load and use environment. When selecting, it should be noted that the power of the motor should match the load as much as possible. It is not suitable for 'large' or 'small horse-drawn cart'. Power selection The power of the motor should be selected according to the load. Although it can ensure normal operation, it is not economical. The efficiency and power factor of the motor are not high; if it is selected, the normal operation of the motor and production machinery cannot be guaranteed. Operation, the efficiency of the production machinery cannot be fully utilized, and the motor will be damaged prematurely due to overload. (1) Selection of continuous running motor power: For a continuously running motor, first calculate the power of the production machine, and the rated power of the selected motor is equal to or slightly greater than the power of the production machine. (2) Selection of motor power for short-time operation: If there is no suitable motor specially designed for short-time operation, a continuous-running motor can be selected. Due to thermal inertia, overload can be tolerated during short-term operation. The shorter the working time, the greater the overload can be. But the overload of the motor is limited. The power of the short-term running motor is usually selected according to the overload factor l. The rated power of the motor can be 1/l of the power required by the production machinery of the automatic labeling machine.