You need to know the label requirements of double-sided labeling machine-automatic labeling machine manufacturer-online printing labeling machine-shenzhen bogao logo
by：Zhongya Packaging 2022-04-28
The double-sided labeling machine is now widely used in the market, and the time-precipitated double-sided labeling machine has a certain number of users in the market. Because the display of the label of the double-sided labeling machine can reflect the overall effect of a product packaging, and it is also a performance that can give consumers an intuitive feeling. If the label is not firmly attached, or there is blistering or irregularity, then it is not It will give consumers a good impression, and they may be spurned by consumers. If they are not selected, there will be no way to talk about sales and competition with other similar products. Under such circumstances, we should understand the four major index requirements of the double-sided labeling machine. (1) Surface material. The stiffness of the label is the key to the label. Therefore, a certain strength and hardness of the surface material is required. The stiffness of the label is related to the thickness of the material and the area of u200bu200bthe label. Therefore, when using a soft film material, the thickness should be appropriately increased. Control above 100μm. Thin paper materials, such as 60~70g/m2 labeling paper, are generally not suitable for making large labels, but suitable for processing into small labels, such as price labels used on price guns. Poor stiffness of the label will cause the label not to be output during labeling, or the label will be rewinded with the backing paper, which will invalidate the automatic labeling. (2) Release force. Also called peeling force, it is the force when the label is separated from the backing paper. The release force is related to the type and thickness of the adhesive and the silicon coating on the surface of the bottom paper, as well as the ambient temperature during labeling. If the release force is too small, the label will easily fall off (leave the bottom paper) during the conveying process; if the release force is too large, it will be difficult for the label to detach from the bottom paper and the label cannot be released. Various technical indicators should be comprehensively controlled to keep the release force within a reasonable range. (3) Bottom paper. It is also an important indicator for controlling automatic labeling. It is required that the surface of the bottom paper is coated with silicon uniformly and has the same release force; uniform thickness and good tensile strength to ensure that it does not break when labeling; uniform thickness and good light transmittance to ensure that the sensor correctly recognizes the position of the label. (4) Processing quality. After slitting, both sides of the bottom paper are required to be flat and free of breaks to avoid the bottom paper from breaking when the tension changes. Avoid cutting through the bottom paper or destroying the silicon-coated layer during die-cutting. If the bottom paper and the silicon-coated layer are damaged, the bottom paper may be broken or the adhesive in the label will penetrate into the bottom paper. . In addition, it is necessary to eliminate the static electricity in the roll paper label before labeling, because static electricity will cause the labeling to be inaccurate or inaccurate when labeling.