Operation specification of automatic round bottle labeling machine-automatic labeling machine manufacturer-online printing labeling machine-shenzhen bogao

Many of the labels of various round products that we usually see are put on by the operation of the round bottle labeling machine. Since having this kind of machine, people no longer need to put labels manually, thus greatly improving production efficiency. When using the automatic round bottle fixed-point labeling machine, you should check whether the height and width of the conveyor belt guardrail have been adjusted to match the bottle body, and the material should be smoothly passed, otherwise it should be adjusted; check the height and front and rear positions of the bottle separation wheel It has been adjusted to match the bottle body, and the bottle should be passed uniformly individually, otherwise it should be adjusted; the inspection of the automatic round bottle fixed-point labeling machine also needs to determine whether the position of the push plate has been adjusted to match the bottle body. The distance between the roll bottle tape is slightly smaller than the bottle diameter, so that the label can be smoothly rolled and attached to the bottle body. 1. Start-up operation 1. Turn on the power switch of the device, which is generally located on the right side of the cabinet. 2. Turn the compressed air switch to the open position. If it is used with a printer, adjust the air pressure of the equipment to 0.5-0.6Mpa. 3. Click on the touch screen controller of the round bottle labeling machine to enter the normal operation page. 2. Running operation 1. Manually control the operation to check whether all parts have been adjusted properly and running smoothly. Otherwise, stop the machine and make appropriate adjustments. 2. Call and confirm the corresponding product program or enter the 'Parameter Setting' interface for parameter setting. 3. Set the counter values u200bu200bof the round bottle labeling machine according to the actual needs of the work. 4. Press the start button and the machine runs online and enters the normal production state. 5. If the equipment fails or an emergency occurs, press the emergency stop switch. 3. Shutdown procedure 1. Press the 'Stop' button first, the whole system will stop immediately, and then turn off the main power switch. 2. In case of emergency, you can directly press the emergency stop switch; when reopening the emergency stop switch or power switch, ensure that the system is in a safe state. 3. When the round bottle labeling machine is not used for a long time, the power cord should be unplugged, the surface of the machine should be cleaned, and the dust cover should be covered.