How to solve the unstable labeling position when the labeling machine is working? The following methods are given by the engineers of Bogao labeling machine manufacturer. You can use the following methods to troubleshoot the reasons for the unstable labeling position. 1. The belt pressing device may not be pressed tightly, resulting in loosening of the standard belt and inaccurate detection by the electric eye. Press the label to solve it. 2. The traction mechanism may slip or not be pressed tightly, causing the bottom paper not to be taken away smoothly. Press the traction mechanism to solve the problem. If the label is too tight, it will pull the label. It is better to pull the bottom paper normally. (Usually if the bottom paper is pulled out when it is wrinkled, it should be pressed too tightly) 3. The shape of the object to be pasted is inconsistent or the positioning is inconsistent. Control product quality. 4. The object to be labeled should be placed in parallel with the labeling direction (pay attention to whether the product moves during the labeling process, and the support rod on the left can be appropriately raised a little bit higher than the right) 5. The object to be labeled is on the labeling station It should be ensured that the rotation is smooth (be careful not to touch the stripping board). When the object is too light, the covering rod should be put down to press the object to be attached.
Dear customer, there are too many customer inquiries, and it may not be possible to reply you in time. You can contact me on WhatsApp (WhatsApp ID: +86 15013463303 Zhongya), or you can send your contact information or email to my email, I will reply you as soon as I receive the message, my email is firstname.lastname@example.org . thanks
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist