Automatic labeling machine photoelectric head sensitivity adjustment method-automatic labeling machine manufacturers-online printing labeling machine-Shenzhen Bogao logo
by：Zhongya Packaging 2022-05-13
Many companies may not know how to check the sensitivity of the photoelectric sensor during production and use after purchasing an automatic labeling machine. This is a very important thing. We must master methods and methods. 1. During the actual use of the automatic labeling machine, you will find existing equipment. If you want to check the sensitivity of the entire photoelectric head, you must check the photodetectors of all devices and use baffles. Shake back and forth within a distance of 5mm to 10mm from the photoelectric head. One shaking will produce more than two sensitive standard liquids. In this case, it shows that their sensitivity is higher. In this case, the sensitivity is relatively low, so we must adjust the rotary button on the potentiometer according to the actual situation. 2. In the actual use of the automatic labeling machine, it is necessary to effectively check the existing marking photodetector and observe the distance of the glass plate in the entire label. Generally speaking, the distance between these glass plates is 1 mm to 3 mm. Bottles with a height of more than 1 mm will not touch the label when they pass. If the distance is not appropriate, the rotary button on the locator can be basically effectively adjusted. If they cannot be adjusted, separate the distance between the photoelectric head and the two labels. 3. During the actual use of the automatic labeling machine, you will find that when we want to make actual adjustments, we should put all the bottles of the labeling machine on the turntable of the existing transmission screen, and then transport the entire product separately. The rotation button of the split screen speed should be adjusted, the transportation speed should be adjusted to 3 to 4 gears, and the labeling speed should be adjusted to 5 to 6 gears. Through the above introduction, I believe that everyone knows how to adjust the sensitivity of the photoelectric head of the automatic labeling machine. We can try it and use the above methods to adjust.