A roller laminator is a machine that uses heat
by：Zhongya Packaging 2020-08-07
Usually a clear monopolymer or copolymer film is used to protect the paper. These are similar to plastic resin that can withstand moisture, aging and other elements of the weather. Laminating machines can come in different sizes to accommodate various paper sizes. A roller laminating machines are often used for industrial needs for larger paper.
This device consists of 2 rolls of laminate film in the interior of the machine. The films contain an adhesive solution on one side that lets the resin film stick to the item being processed. There are different kinds of laminating machines. One of the most common types is the thermal rolling laminator machine. This kind of machine needs to be pre-heated.
Once the thermal roller laminator is heated, it enables the adhesive to melt, producing more effective coating on the surface of the document. Paper is placed into the laminating device and the rollers thrust the material effortlessly through the machine. Once the paper is covered in plastic, the machine pushes it out to produce the finished product, a piece of paper protected and sealed in clear plastic.
If you own a roller laminating machine, you should maintain and clean it properly to make it produce excellent laminates for a long time. Cleaning your machines rollers regularly will keep your device running in excellent condition and produce good looking laminates. Keeping your rollers free of dirt will also allow laminates to come out smooth without wrinkles or creases.
You can begin cleaning your laminator by turning it off and unplugging it from the wall socket. Remove the rollers from the device. Make the laminating machine run in reverse with the film at the rear the rollers. Now, open the device and take the films out by sliding it away from the spindles. Once that's done, let the device cool down till it reaches room temperature.
Once the rollers are cool to the touch, clean them with an abrasive foam pad soaked in window cleaner. Make sure you squeeze off excess liquid first. Scrub the foam pads horizontally as you slowly turn the rollers around with your hands. If you find touch residue after you scrub the rollers, use a laminator cleaner on your scrubbing pad and proceed to clean the rollers as instructed earlier.
Allow the rollers to air dry or use a soft microfiber cloth to dry it. Place the films back into the laminator's spindles and then plug in your roller laminator to your power source. Test your machine to see if it works properly. Make sure to test it first before using it on real documents you are supposed to laminate to prevent wastage.