What should I do if there is a problem with the self-adhesive labeling machine working? -Industry News

As the main classification of packaging machinery, self-adhesive labeling machines have been fully used in the pharmaceutical industry. For pharmaceutical manufacturers, whether it is from the labeling production equipment, or from the self-adhesive label and the bottle to be attached, it will improve the integrity of the product identification. The labeling machine has played a variety of roles in the development of the pharmaceutical industry. It is an automatic packaging machine, which uses self-adhesive film roll labeling paper. During the automatic bottle feeding process, the label paper of the roller is torn off one by one and attached to the bottle body in the required direction. The equipment adopts computer programming and full Chinese LCD touch screen, text type and button type operation. It is a modern mechatronics product with excellent and reliable characteristics.　　　　 Below we analyze the reasons why the self-adhesive labeling machine is unstable or the labeling quality is not good. When the self-adhesive labeling machine is in actual use, once this happens, the bag pressing device may be considered, and the bag pressing device may not be compacted at all. In this case, the film should be used for actual detection. , There may be inaccurate film detection, there may be slippage caused by the tractor, or there may be no compaction, or it may be unable to smoothly take away and stop. In this way, the compaction of the traction mechanism can effectively solve the problem. , And the over-tight condition will distort the entire label, pulling the waste paper through normal conditions. When placing the object to be pasted, more parallel directions must be taken into consideration. Basically, the object to be pasted must be rotated smoothly at the workstation, and when the object is too light, all the original poles must be removed. Put them down and press other objects.　　　　 There is a problem with the self-adhesive labeling machine, how to solve it? When the self-adhesive labeling machine performs the actual labeling, the quality may be poor, which can reduce a part of the speed. The labeling may be transparent labels, or other labels may be too soft. When labeling is performed At that time, the gravity adjustment may not be as good as we thought, so in this case, all the strengths must be fully adjusted. There may be wrinkles at the beginning of the labeling position. Then when we adjust, it may be that the label is over. Soft, the label is already bent when extended. If it is raised, the position of the entire specimen may be close to the product. Therefore, the front and back of the label are not aligned. Adjusting the inclination of the support rod will make the label extension direction of the entire product vertical.