What is the reason for the increase in oil temperature of the automatic labeling machine-industry news

With the development of the economy, various manufacturers are constantly expanding their scales. Therefore, some machines will be adopted for packaging, but the machines will also have some problems. Then you know the reason why the oil temperature of the automatic labeling machine has risen what is it then?　　　　 1. Too many hydraulic oil brands, especially improper selection of viscosity index oil, will directly threaten the normal operation of the hydraulic system. The viscosity planning and viscosity change of hydraulic oil should be as small as possible. Hydraulic oil should also be considered in specific regions and seasons; oil labeling machines with clear rules should be filled in strict accordance with the rules of hydraulic oil to be filled.　　　　2. Poor heat dissipation of the packer 　　　　 Excessive dust accumulation on the surface of the radiator will cause heat, poor ventilation and high temperature of the hydraulic oil tank; low liquid level and circulating oil system will not work properly, which will lead to system high temperature.　　　　3. Hydraulic pump suction 　　　　 The air sucked by the hydraulic pump mixes with the air in the oil too much, forming 'cavitation'. Under high hydraulic shock, accompanied by violent oscillation and noise, the temperature rises rapidly.　　　　4. Improper pressure adjustment of the metal automatic labeling machine 　　　　 The system pressure relief valve is adjusted too high, so that normal overflow and decompression cannot be performed, which will lead to an increase in internal leakage, which will lead to an increase in temperature.　　　　 5. Leakage 　　　　 During the energy transfer process, assuming that the leakage is serious, the volume of the system will increase and loss, and the energy loss will be converted into high temperature heat of the system. Assuming that the component space is too small, the conflict between relative motions will also increase the oil temperature. The interval is too large and the leakage is serious.　 　 　 　 6. Parts wear 　 　 　 　 　 　 　 automatic labeling machine hydraulic system components severe wear and tear will cause the system to overheat. Many parts of the components in the system rely on the sealing gap. Once the hydraulic components are worn, this will lead to an increase in internal leakage, and then the temperature will increase, the viscosity of the oil will decrease, and the internal leakage will further increase, resulting in a further increase in oil temperature, thus forming a vicious circle.　　　　 The above are the 6 reasons why the oil temperature rises in the automatic labeling machine, I hope it will be helpful to everyone.