How to detect the leakage of the labeling machine without leakage-industry news

When the labeling machine is working on the assembly line and labeling, the equipment will miss the label. At this time, it is usually because of the problem of the label itself that the labeling machine operates and causes the label to be missed.　　　　The label detection electric eye signal point on the labeling machine equipment occasionally does not go in place, causing the traction motor to stop before the label in front of the sticker labeling machine is finished, and the electric eye senses the object for the second time later.　　　　 The label is just the positioning point that was not completed when the last labeling was completed, so that the object is not covered with the label, that is, the label is missed.　　　　 Therefore, we can use the label stop delay on the labeling machine, so that each signal of the detection label electric eye can complete a cycle. If the above description of the reasons for the missing label appears, it means that a cycle of label positioning has not been completed, so the label stop delay can be used to allow the label to go a short distance after the label is positioned, so that the detection and positioning of the label can complete a cycle. (This method is only for labeling with relatively low accuracy requirements. If high-precision labeling is required, it is better to improve the label.) If none of the above methods can solve the problem, replace the standard measuring sensor to verify whether it is a problem with the sensor. Replace the standard electric eye.