How does the region judge the failure of the labeling machine? -Industry News

When people use the labeling machine, there will be some failures in the equipment due to some reasons. Then after the failure, which aspects should we judge from? From what aspects can we judge and find the specific reasons, we can 'prescribe the right medicine'. The following editor will introduce to you: 　　　　 1. The standard is stable. The method I often recommend to my customers is to adjust the device to the set maximum speed, count the position of the brake electric eye on the label, and then trigger the labeling electric eye quickly and continuously, remember to observe whether the label is running linearly, stop the trigger and observe The brake electric eye is at the position of the label (a good labeling machine should be the same position), count the number of labels, a good labeling machine will never exceed the number of triggers, of course, if you are in If the label is not finished, the labeling is triggered again, and there may be fewer labels.　　　　Second, sound. The characteristics of the self-adhesive labeling machine determine that the labeling motor needs to be continuously started and stopped. If you listen to a company’s starting and stopping sound of the labeling motor which is more urgent, then I will tell you that this machine is not a program Insufficient rigor is the problem of motor selection.　　　　 3. Appearance. The appearance of the equipment can reflect the designer's idea of u200bu200bthe machine. Of course, the appearance referred to by the author does not generally refer to the beauty. The appearance refers to the rationality of the equipment design, such as the difficulty of changing the label, whether the adjustment position does not require the use of tools, and whether the human-machine interface is easy to understand Good operation etc.　　　　 Whether a machine is only designed to complete the packaging task, or whether it takes into account the human side, you can see from the appearance. Check that the photoelectric of the working object of the differential pressure gauge has no output. The possible reason is that the sensitivity is set too high. When the optical fiber is illuminated at the bottom of the product in the operating state, each product must be a unique and stable output signal. Confirm whether the motherboard and HMI are working normally and the labeling on the HMI has been activated.