Automatic round bottle labeling machine Semi-automatic high precision flat labeling machine Self-adhesive labeling machine

The self-adhesive labeling machine may be left unused for a long time, which may cause aging of its components, especially the wiring. Why? How to avoid this situation for tractors that are used less frequently? The self-adhesive labeling machine is left unused for a long time, and the insulating layer on the surface of the circuit is affected by factors such as oxygen in the air, temperature, and heat, and may experience aging. So as to affect the safety of its use, how should this situation be avoided? For tractors that are used less frequently, they can be taken out regularly for maintenance. At the same time, they can be connected to the power supply to make them idling for a few laps. In this way, even if the internal components are checked, the aging speed of the line can be reduced, which can be described as killing two birds with one stone. . When the self-adhesive labeling machine is temporarily idle, you should unplug the power supply and cover it with a dust-proof cloth to prevent dust from falling on the labeling machine. In addition, the high temperature belt of the labeling machine must be regularly decontaminated, so as to better ensure the high-quality operation of the labeling machine. Don't forget to apply some lubricating oil in the maintenance of self-adhesive labeling machine. A certain amount of lubricating oil should be applied to the labeling machine after a long period of operation. Many parts of the labeling machine, such as gears, bearings and gearboxes, are prone to rust and wear after being used for a period of time. The lubricating oil can ensure the smoothness of all parts of the labeling machine. It should be noted that the labeling machine should be coated with lubricating oil after continuously working for more than 48 hours.