How does the labeling machine apply the bottle label neatly? This is a technical problem. Some novices don't know how to debug the labeling machine. Go to the online labeling machine debugging video, and I don't know how to do it after reading it. Now the editor will share his method. 1. When accepting samples and labels, first determine whether the arcs of the label and the sample match. You can simulate the labeling first by hand. If it is a mismatched label, the label will be slanted or the label will appear in two sections. After alignment, there are wrinkles in the middle part. The above situation requires the customer to modify the label. 2. Debug the over-labeling mechanism to adapt it to the bottle shape. If the taper is too large, a top-pressing mechanism needs to be added to prevent the over-labeling mechanism from exerting upward force on the bottle when there is a taper, which is caused by the sample leaving the transportation. The labeling error increases. 3. When it is determined that there is no problem with the label, the adjustment mechanism needs to be adjusted to match the direction of the label with the taper of the sample. The larger the taper, the larger the adjustment space is needed. After the basic angle is determined, the trial paste can be carried out. The direction of the label can be adjusted according to the actual situation. At the same time, the traction and the frequency of over-labeling need to be matched. The above is Bogao's standard machine adjustment seat, which can be adjusted in multiple directions and can handle most of the taper bottle angles.
Dear customer, there are too many customer inquiries, and it may not be possible to reply you in time. You can contact me on WhatsApp (WhatsApp ID: +86 15013463303 Zhongya), or you can send your contact information or email to my email, I will reply you as soon as I receive the message, my email is email@example.com . thanks
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist